MATERIALS, DYES and ADHESIVES
The things you will need to make the special items shown here and where to get them.
A.C. MATERIAL:
These are the materials that they use for their own items
PLASTIC
this
would be five star except that it is somewhat thin and not good for close
contact with the body. It comes in colors; pink (the same color as this page so you know it is just sooo rubber panty!),
navy blue, yellow and clear. While not a good material for putting on the body,
it is a light-middle weight, smooth plastic that is excellent for trim such as
curtains and dresser toppers and outer clothes such as pinafores, overdresses
and the like. it is what they make their rubber panties from and they are pretty
good.
Sold by the meter and is about 46 inches wide.
RUBBER
This
is a smooth middle weight, fairly durable, rubber sold in white, blue and dark
pink opaque and translucent natura They also
make panties from this material that are very good.l. It can be put on the body without
deteriorating. Would be five star if the pink were light in color. the material is about 35 inches wide.
AC Medical has $25.00 minimum order policy
NOTE: AC Medical claims not to be AB/Rubber friendly, However. the large
number, and style of some of the pictures, the way they understand materials and
styles having recommended to us some very AB/Little Girl items of which they
seem proud, as well as the tone of some of their discussions with us and what
one of the persons who does their photo modelling has said to me suggests
otherwise. From what I understand. this AB "non-friendliness" is to keep their
tax-free status. Keep discussions very general and avoid AB/Rubber topics. They
are a valuable resource. We do not wish to lose them
Go HERE and scroll
dwon. Prices vary from country to country.
COLORING SUPPLIES
NU-LIFE
Plastic dye
There
are times when you need to either change the color of an item or make it opaque.
An example of this is if you wish to make a bedspread from the Comco material
(recommended) This comes in about two dozen colors including metallic gold and
silver (which we have not tried
If not applied properly it does come off; So follow directions and let it dry
thouroughly. After it has dried, dust with baby powder. You may have to renew
the color every now and then. Also if this is being used to make a material
borderline opaque, for example spraying the back of a pink item , be sure to
keep the coating as evenly thick as possible unless you want some parts less
opaque than others.
There are others like this, one is called Magix or Magic Do not use the Kiwi
brand as it is made for shoes and gives a leathery finish and does come off
rather easily.
NOT RECOMMENDED FOR USE WITH ANYTHING THAT COMES IN CONTACT WITH THE BODY.
RIT and TINTEX DYES
Fabric Dyes
Some
materials, like the Comco can be dyed using very warm or somewhat or even full
hot water. You may want to color such materials without making them opaque.
These dyes serve very well and come in a variety of colors
ADHESVES/font>
If you cannot sew well enough to work with baby rubber nor have the professional
tools and treaing to heat-seal seams or patches, take heart. There are adhesives
on the market that will fasten these materials to themselves or other things
very well. We will add to this list from time to time. The charateristics that
we look for are that they actually dry and when dry, are flexible and clear
(while opaue and semi-opaque are all right for opaque materials in genersl, you
must be sure not to let any get onto areas that will show), do not require any
special care or processes to use other than the usual recommendations, in other
words; use right out of the tube, you ought be able to get them at least one of
these at a major hardware chain like Tru-Value or Ace or a "..-Mart". In general
look at the list of meterials that the adhesive works on
GOOP. This semi-gelatinous cement is an all purpose glue of which there are
several kinds, for our purposes, get the MARINE or HOUSEHOLD
Homax WELDER. This is thinner than GOOP, "sets" faster but does not hold as well
NYPBCO WELDER. I have not seen this in years but it is a semi-gelatinous
adhesive like GOOP but holds better.
All of these dry flexible and crystal clear. ALWAYS BE SURE TO LET THE GLUE DRY COMPLETELY
BEFOR USING. THIS IS FOR TWO REASONS, FIRST; THAT MAKES SURE THAT THE SEAM IS
AS STRONG AS CAN BE. SECOND; THESE GLUES CONTAIN CHEMICALS THAT YOU WILL WANT
TO BE SURE HAVE GONE COMPLETELY AWAY.